Round Shape Home Fire Standalone Smoke Detector Smoke Alarm With CE
TUV Certificate
Products Description
Accurate response: The use of enhanced photoelectric sensors can quickly and
accurately respond to all fire situations, with one alarm; provide
smoke or fire warnings as early as possible, while minimizing false
alarms
Self-activation: When it is installed in the mounting bracket, this alarm will be
automatically activated; the TEST/SILENCE button allows you to
temporarily silence the annoying alarm, unless the device is in
alarm mode, otherwise the silent mode will not be activated
Auto-check function: continuous self-checking, reminding the alarm if there is a fault
or the battery is low; the 85 dB alarm and LED indicator will
remind you of the working status of the alarm
Convenient installation: using the included mounting brackets, screws and anchors, it can
be easily installed on any wall or ceiling; wireless connection
installation
Quality Assurance: Pass TUV certification and meet CE safety standards; 2-year
warranty and lifetime customer support
Attention
1. Please test it once a month to ensure that the smoke alarm works
properly
2. Please clean the dust on the alarm every 6 months to prevent
false alarming caused by clogged smoke alarms
Technological Parameters
| Product name | Round Shape Home Fire Standalone Smoke Detector Smoke Alarm With CE
TUV Certificate |
| Relative humidity | ≤ 95%RH, no condensation |
| Colour | Pure white |
| Alarm Volume | >85 DB at 3m |
| Battery | Alkaline zinc battery |
| Low Battery | 2.6 ± 0.1 V |
| Capacity | Up to 40m² |
| Temperature | 0℃ ~40℃ |
| Comply to Standard EN14604 | 2005/AC:2008 |
| Certificate | CE TUV |
Feature
85 decibel alarm: 85 decibel alarm noise level at 3 meters to remind your whole
family and help you prepare for an emergency.
3-year battery life: 3-year alkaline zinc battery(Replaceable battery), no need to
replace the battery frequently or worry about power failure, saving
time and effort.
Silent mode: During the unit alarm period, you can press the test button, and
the unit will pause the alarm for about 10 minutes. The red LED
flashes once every 8 seconds, indicating that the smoke alarm has
successfully entered the silent mode.
LED indicator: only red, the indicator responds differently in different states
- Normal state: The red LED flashes every 60 seconds.
- Test status: The red LED flashes once per second.
- Silent/silent mode: The red LED flashes once every 8 seconds.
- Low battery status: The red LED flashes once every 60 seconds and
beeps once every 60 seconds.
- Failure status: The alarm beeps every 40 seconds.
Where to install
1. At first you should install an alarm in the bedroom and walkway.
If there are several bedrooms in the house, please install an alarm
in every bedroom.
2. Install an alarm above the stairway and on every floor of the
house.
3. Smoke, heat and burning things will spread horizontally after
rising to the ceiling, so install the alarm in middle of the
ceiling.
4. If the alarm can not be installed in the middle of the ceiling,
install it keeping 300mm away from the corners .
5. If the alarm is installed in the wall, it should keep 100mm away
from the ceiling.
6. If the length of the room or the hall is beyond 30 foot, you
need to install several alarms there.
7. When the wall or ceiling is slanting, the alarm needs to be
installed minimum 500mm away from the highest wall or ceiling point
in the room.
Locations to Avoid
1. High-humidity areas such as kitchens, and bathrooms;
2. Next to air outlets, fans and central heating;
3. Dusty, dirty areas or areas with insects;
4. High-temperature and easily polluted places;
5. Places with difficult access, making it difficult to operate the
test function;
6. Within 1.5m from lamps;
7. Next to doors or windows;
8. In the top of rooms with sloping roofs, the corner of the room
or other dead-air spaces.
Packing List
1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
FAQ
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully
test three times before shippment. What is more, our quality
areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working
days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo
printing?
A: Yes, we support OEM service, including customizing boxes, manual
with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T,
Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days),
TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
